Protection Circuit Module (PCB) for 11.1V Li-Ion 3 Cells Battery Packs 3A Working (11A cut-off)
Apply for 3 cells Li-ion / Li Polymer battery pack protection Internally trimmed charge and discharge voltage limits Discharge current limit detection Low current standby mode when cells are discharged High quality and high yield100% tested before shipment Adopt Mitsumi MM1414C protection ICConnection Instruction Technical Specifications.style1 {border-collapsecollapse;border1px solid #000000;}.style2 {border1px solid #000000;}.style3 {text-aligncenter;border1px solid #000000;vertical-align:middle;}ItemContentCriteriaOver Charge ProtectionOver Charge Detection Voltage4.35??0.025VOver Charge Release Voltage4.15??0.05VOver Discharge ProtectionOver Discharge Detection Voltage2.4??0.08VOver Discharge Release Voltage3.0??0.15VRated Discharge Current3AOver Current ProtectionOver Current Detection Current11-13ARelease ConditionCut LoadDetection Delay Time5-15msShort Circuit ProtectionShort ProtectionImplementedRelease ConditionCut LoadInterior ResistanceP+, P- Conduction Resistance50-100mCurrent ConsumptionCurrent Consumed in normal Operation35A MaxDimension50 x 16 x 4.1 mmApplication Notes Please use the compatible charger for your battery pack. Pay special attention to your input and output voltage current to avoid PCB damage When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled Internal static charge protection circuit built into the PCB. However, do not subject the PCB to high static charge to avoid damage Without the written agreement from us, please don't use this PCB for application in medical instruments, emergence devices, auto and airspace vehicles or other device that might have impact on human bodyBecause of the??very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.
Price: $9.99
Tenergy TN141 Smart 2-Bay 9V NiMH/NiCd Battery Charger
Tenergy TN141 2 Bay 9V Smart Charger for Ni-MH BatteriesRapid chargingWorldwide voltage 100V ~ 240VACAutomatically detect-Delta VMicroprocessor controlled to ensure charger safetyLED indicator for each individual bayFeaturesApplicable for 9V rechargeable Ni-MH batteriesWorldwide voltage 100V ~ 240VACBuilt-in micro controller to ensure full charge5hr safety timerCircuit / polarity protectionAutomatically detect – delta VLED indicator for each individual bayIndicator statusChargingRED, Fully chargedGREENBattery Type Capacity Charging time 1~2pcs Ni-MH 9V 160mAh 1.8 hrs 180mAh 2.0 hrs 200mAh 2.2 hrs 220mAh 2.5 hrs SpecificationsOutlet input voltage11.4VCharge current100mA x2Operating Temp0 ~ 40??CWeight83gDownload product manual here.
Price: $9.99
Combo: Tenergy T-2833 AA/AAA NiMH Charger plus 4 AA 2600mAh Rechargeable Batteries
Charger ModelV-2833 Input120V AC, 500mA OutputAA – 2.8 /5.6V, 700 mA OutputAAA – 2.8/5.6V, 350 mA FeaturesCharges 2 or 4 AA & AAA batteries at a timeCharges NiMH or NiCd batteries (separately)Automatic charging current selection for AA or AAA Equipped with LED lamp to indicate proper chargingAdjustable battery contact plate Charging TimeAA AAA Charging Time600-800mAh 240-320mAh 5-7 hours 800-1000mAh 320-400mAh 7-8 hours 1000-1200mAh 400-500mAh 8-10 hours1200-1400mAh 500-600mAh 10-12 hours 1400-2700mAh 600-750mAh 12-19 hours High Capacity Rechargeable Batteries High quality AA Size rechargeable Nickel Metal Hydride(Ni-MH) battery, top of line.Exact replacement for standard AA size battery in all the devicesProvides ultra long use time per charge with this ultra high 2600mAh capacityAdvanced Ni-MH technology means twice longer use life percharge than the ordinary rechargeablesDesigned for enhanced performance for high drain applications such asdigital cameras, CD players, portable audio devices, hand held games, 2-wayradios, PDAs, and other portable high drain digital electronicsCan be recharged for up to 1000 times, providing big savings by replacinghundreds of throw away AA batteries.Convenient operation without memory effect. Can be rapidly charged with any quick charger, smart chargers, plug incharger or universal chargersBattery tested based on International Electronic Commission (IEC)standard to ensure capacity, quality and life time Download product data sheet here. Other NiMH Rechargeable Battery Combos Also Available:Looking for AA Only Battery Combos? Click HereLooking for AAA Only Battery Combos? Click HereLooking for C Only Battery Combos? Click HereLooking for D Only Battery Combos? Click HereLooking for Mix of Various Size Battery Combo Kits? Click HereLooking for Charger Combo Packages? Click Here
Price: $9.99
Lipo Battery Power Level Tester and Alarm to Indicate Low Power
A great and neat tool to have. Always keep your lipo charged, and when it is low power or running weak stop using it to recharge. Help prevent damage to your expensive LIPO battery and prolong it's battery life by never letting the voltage drop too low. Great support device for any LIPO pack.Purpose and Features Can be used for 3.7V (1S Pack), 7.4V (2S pack), or 11.1V (3S pack). Red LED will flash when cell is below 3.3V and an Alarm will sound when cell is below 3.0V indicating the Lipo Battery pack should be recharged. With 2.5mm pin spacing, it works with 95% of the lipos on the market.Specification Dimention37mm x 21mm x 10mm Weight0.2 oz (5 g)Caution Never charge lipo battery in a flammable surface ALWAYS monitor your battery when it is being charged. Use only lipoly battery charger to charge a lipoly battery.
Price: $9.99
Primary Lithium thionyl chloride Battery C Size 3.6V 9.0 Ah , same as LS26500 and ER26500 etc with Wires (non Rechargeable) (DGR-A)
Ultra High Energy Density C sized Primary Lithium Thionyl Chloride battery Perfect battery choice for powering wireless alarm, security systems, industrial meters, memory backup for computers, night vision equipment and other devices need long-lasting batteries. Lithium Thionyl Chloridebattery technology providesthe highest energy density, three timeshigher than Alkaline (Zinc Manganese Dioxide) batteries. Widest operating temperature range of -76F to + 185 F, ideal for rough security, industrial and fieldapplications Ultra low self discharge at less than 1% per year at +68F, enabling an effective shelf life of 10 years. Non-flammable electrolyte. Compatible with Saft LS26500,LS26500C, Lithium cell UL Approved — BBCV2.MH30127. Passed UN transportation tests (T1-T8).Pre-soldered wires for easily making battery packsor other connectionsKey Technical Data (More detailsData sheet of ER26500) ChemistryLithium-thionyl Chloride (Li-SOCl2) technology Nominal capacity9 Ah ( 9,000 mAh)Open circuit voltage(at +20C +68F) 3.66VNominal voltage(at 1mA +20C +68F) 3.6VMax. Continuous current200mA Max Pulse currentUp to 400mAStorage (recommended)+30C +86 F maxOperating temperature range-55C / +85C Diameter (max)26.2mm(1.02 in) Height (max)50.5mm(1.98 in) Typical weight55g (1.8 oz) Primaryapplications for:Radio communication equipments and other militaryelectronics Building alarms, monitoringand security systems Industrial and residential metering systems Emergency location transmitters and BeaconsGlobal POsitioning Systems (GPS) Computer or server memory back up LED lightingdevices SonobuoysCompatibalewith andreplaces SAFT LSH20 battery with over 40% more energyUse WarningThis batteryis a non-rechargeable battery.DO NOT CHARGE THE BATTERY!Do not use if the battery casing is damaged. Please discharge the battery for a few minutes with 100mA. Don't use different models of battery in series. This is not ahigh drain battery, please don't use it for the applications with discharging current > 200 mA! The storage area should be clean, cool not exceeding +30 Deg C , dry and ventilated
Price: $9.99











